Office breakout space with a full-height Bulletin Board linoleum pin wall

Forbo bulletin board studio

Explore Our Bulletin Board Collection

14 Forbo linoleum pin-board colours in 6 mm solid linoleum, spanning neutrals, earth tones, greens, warm colours and blues — with outstanding pin-hole recovery.

Compare every colour, see it in real settings and have it cut to size in our Nenagh workshop when you are ready to order.

About Bulletin Board

A pin surface that still looks right in ten years

Bulletin Board is solid natural linoleum on a jute backing — linseed oil, pine rosin, wood flour and natural pigments pressed into a warm, matte, gently flecked surface. Because the colour runs through the material and the body is resilient, pin holes close over instead of crumbling the way cork and soft board do.

We supply it wherever people communicate: classrooms and corridors, hospital wards and waiting areas, offices, meeting rooms and workshops. It also makes a beautiful functional finish on walls, doors, cupboard fronts and desktops.

  • Excellent pin recovery

    No crumbling or loss of grip

  • Natural materials

    Bio-based with a jute backing

  • Cut to your sizes

    Panels prepared in our workshop

  • Built for busy rooms

    Durable, wipeable, colourfast

Bulletin Board linoleum being cut to size on a workshop bench

The colour range

Fourteen colours, straight from the Forbo chart

Pick the tone that suits the room, then mix colours across a wall in blocks, bands or hexagons. Tell us the layout and we will work out the sheet take-off and cutting list.

Where it works

Walls, boards, doors and furniture

Education application of Bulletin Board linoleum

Education

Classrooms, corridors, staff rooms and libraries. Work goes up and comes down again and again without the surface breaking up.

  • Full-height display walls
  • Framed boards
  • Locker and door panels
Workplace application of Bulletin Board linoleum

Workplace

Project walls, breakout zones, meeting rooms and photocopy areas. A calm acoustic-feeling backdrop for pinned thinking.

  • Project and scrum walls
  • Reception features
  • Desk returns and screens
Healthcare application of Bulletin Board linoleum

Healthcare

Behind beds, in waiting areas and staff notice zones. Warm, wipeable and easy to keep looking presentable.

  • Bedhead panels
  • Visitor information
  • Staff notice walls
Joinery & furniture application of Bulletin Board linoleum

Joinery & furniture

Bonded to MDF or ply for cupboard fronts, desktops, door panels and reception joinery with a soft, matte hand feel.

  • Cabinet fronts
  • Desk and table tops
  • Door and wall linings

Technical & environmental

Specification at a glance

Product
Forbo Bulletin Board linoleum surfacing
Thickness
6 mm
Roll width
1.22 m
Cut panels
Cut to your sizes in our Nenagh workshop
Composition
Linseed oil, pine rosin, wood flour, limestone, natural pigments, jute backing
Surface
Matte, tactile, naturally flecked
Pin recovery
Excellent — no crumbling or loss of grip
Colours
14 standard colours in the Bulletin Board range
Lead time
Typically stock or short order lead time — confirm on enquiry

Figures are indicative. Full Forbo technical and environmental datasheets are available on request — ask us and we will send the current documents for your specification.

Naturally made

  • Made from rapidly renewable natural raw materials
  • Bio-based content with a jute backing
  • Naturally durable — long service life in busy shared spaces
  • Environmental and technical datasheets available on request

Installation, cleaning & maintenance

Straightforward to fit, easy to live with

For large wall areas we always recommend an experienced installer. For framed boards and panels, most joinery workshops fit Bulletin Board comfortably — and we can do the cutting and bonding for you.

  1. 01

    Prepare the substrate

    Walls or panels must be sound, dry, clean and flat. MDF or ply substrates should be conditioned in the room before bonding.

  2. 02

    Acclimatise the material

    Leave the linoleum flat in the room for at least 24 hours at normal room temperature before installation.

  3. 03

    Bond with the correct adhesive

    Use the recommended adhesive system and roller-press the full surface. We supply the adhesive and trims alongside the material.

  4. 04

    Trim, frame and finish

    Finish with timber framing, aluminium trim or a flush shadow gap. We can cut panels to size before delivery.

Cleaning & care

  • Dust with a soft brush or vacuum with a brush head
  • Wipe marks with a damp cloth and a neutral pH cleaner
  • Never use abrasive pads, bleach or strong alkaline cleaners
  • Standard pins, push pins and staples all hold well

Questions

Bulletin Board FAQs

Samples, sizes and pricing

Send us the room, the colours you like and the panel sizes. We will confirm availability, price the material and adhesive, and cut everything to size before it leaves Nenagh.